Why Is Your Insignia TV Not Turning On – Here’s What to Do

Insignia TVs are a popular brand of televisions known for their quality and affordability. However, like any electronic device, they may experience problems such as not turning on.

You must have settled in for a night of binge-watching your favorite shows, only to find that your Insignia TV won’t turn on?

Frustrating, isn’t it? Many Insignia TV owners have encountered this problem as well, and it can be caused by various unforeseen reasons such as damaged power cable.

By following the troubleshooting steps shared in this post, you can potentially avoid costly repairs or the need for a replacement. So, before getting overwhelmed, give these steps a try!

Here today, I am sure you’ll like to know the reasons why your Insignia TV may not turn on, fixing this as well isn’t a complex task.

With a little troubleshooting methods, you can usually resolve the issue and get your TV up and running again.

In briefly, your Insignia TV may decide to keep off as it won’t turn due to little problem with it hardware components like;

  • Bad power cable.
  • Damaged power outlet.
  • Stuck or Unresponsive remote control.
  • Fried power supply board.
  • Defective hardware components attached to the TV.

If your Insignia TV won’t turn on, it’s important to identify the cause of the problem. By doing so, you’ll have a clearer idea of what steps to take to fix it.

In this article, we’ll guide you on where to look to troubleshoot the issue with your Insignia TV.

Why Is Your Insignia TV Not Turning On?

Why Is Your Insignia TV Not Turning On

Problem with the Power Source

When your Insignia TV refuses to turn on, one of the main reasons is often related to the power source.

Specifically, problems with the power cable can prevent the TV from powering on and result in a black screen.

If there is an issue with the cable that transfers electricity to the TV, it can cause the TV to not respond when you try to turn it on.

However, damaged power outlets are only involved in this situation. If the power outlet your TV is connected to is damaged or not working properly, it can prevent your TV from turning on.

Fixing this is quite easy and straightforward. You can try using a different outlet or have the current one repaired (details later).

If your TV is not protected against sudden increases in electrical voltage, it may have been damaged by a power surge.

This can harm the power supply board inside the TV and prevent it from turning on.

In such cases, it is recommended to seek professional repair or consider replacing the power supply board.

Issue with the TV Remote Control

Another common reason why your Insignia TV may not be turning on is an issue with the TV remote control.

If the remote control is not functioning properly, it can prevent the TV from powering on. Here are a few possible causes and quick things to try:

Dead or Weak Batteries

Check the batteries in your remote control and ensure they are not dead or running low. Replace them with fresh batteries if you notice weakness in any of them and try again.

Interferences from Obstruction or Distance

Make sure there are no obstructions between the remote control and the TV. Aim the remote directly at the TV and ensure you are within a reasonable distance for it to work effectively.

It’s advisable to align both devices or move a bit closer to your TV, and point the remote directly to it.

Remote Syncing Issues

In some cases, the TV remote controller may need to be sync with TV before it can work appropriately.

There are chances that the remote control has become unsynced with the TV, and causes its inability to turn it on.

Refer to the TV’s user manual for instructions on how to re-sync the remote control.

Faulty Remote Control

When all else seems inspected on your TV remote control, you must consider the possibility of a faulty remote control.

See also  What Does the Nest Thermostat Red Blinking Light Means [Answered]

The remote control plays a crucial role in sending signals to the TV, including the power-on command.

Read Also: Blink Doorbell Not Recording [Try These Fixes]

If the remote control is malfunctioning or unresponsive, it can prevent the TV from powering on.

When the remote control becomes stuck, it may not transmit the power signal to the TV, even if you press the power button.

This can give the impression that the TV is not turning on, while in reality, the issue lies with the remote control.

Defective Hardware Components

Another thing that may require attention is the hardware components attached to the TV. Since modern TVs are now made to stay compatible with various hardware devices to improve its functionality.

There are chances that your TV is not turning on because of defective devices or wrong input.

If any of these components attached to the TV are defective or damaged, it can prevent the TV from powering on.

Wrong input on the hand. This is liable to happen if your TV is placed closer to the wall, and requires a great effort before you can access it back.

When hardware components fail, they can disrupt the flow of electricity or prevent the necessary signals from reaching the different parts of the TV.

This can lead to a complete power failure or an inability to turn on the TV.

How to Fix Insignia TV Not Turning On

Check if Your Power Outlet is Working

Now starting with the easiest fix to rectify the issue of your Insignia TV not turning on.

Conduct a proper check on everything that is responsible for transferring electricity to the TV.

Follow these steps to ensure a stable power supply and check for any connection issues that might be preventing your TV from turning on.

Firstly, check the power outlet that your Insignia TV is plugged into. Ensure that it’s working properly by connecting another device.

Such as a lamp or a smartphone charger, to the same outlet. If the other device powers on, the outlet is functioning correctly.

And if it’s not, take the necessary steps to fix or try out another.

Next, inspect the power cord connected to your Insignia TV. Look for any visible damage, such as frayed wires or loose connections.

If you notice any issues, it’s crucial to replace the power cord with a new one specifically designed for your TV model. A damaged power cord can prevent the TV from receiving adequate power.

Why Is Your Insignia TV Not Turning On

If you’re using a power strip or surge protector to connect your Insignia TV, check if it’s working correctly.

Sometimes, power strips or surge protectors can experience issues or become overloaded, which may disrupt the power supply to your TV.

Try connecting your TV directly to a power outlet and see if that resolves the problem.

To further troubleshoot the power supply, try using a different power cord or power outlet.

If you have access to another power cord compatible with your Insignia TV, switch them and see if the TV powers on.

Similarly, try plugging your TV into a different outlet to eliminate the possibility of a faulty power source.

By carefully inspecting the power supply and connections of your Insignia TV, you can rule out any power-related issues that might be preventing it from turning on.

If these steps do not resolve the problem, proceed to the next sections for further troubleshooting.

Disconnect the Power Source and Power Cycle the TV

If your TV doesn’t appear to turn on after doing the needful concerning the power source and the TV power cable, it’s time to disconnect it from the power source and try simple power cycling.

Tagged as a less complex fix as well, power cycling involves draining any residual power from the TV’s internal components and allowing them to reset and start with a fresh slate on a fresh start.

This simple yet effective technique can often resolve minor glitches or temporary software hiccups that prevent the TV from powering on.

Here in this part, I’ll guide you through the process of disconnecting the power source and power cycling your Insignia TV.

Why Is Your Insignia TV Not Turning On

Before proceeding with the power cycle, ensure the TV is completely disconnected from the power source to allow for a fresh start.

Follow these steps: Locate the power cord connected to your Insignia TV and trace it to the power outlet or power strip.

Carefully unplug the power cord from the outlet or power strip. Confirm that the TV is entirely disconnected by checking for any indicator lights or signs of power on the TV body.

See also  Is FuboTV Available on PS4? Answered

Leave the TV disconnected from the power source for several minutes in order to ensure that all capacitors within the TV discharge completely.

After a while, press and hold the power button on the remote or TV itself for 10-15 seconds. This action helps to discharge any remaining power within the TV.

After the waiting period, reconnect the power cord to the power source, and press the power button on the TV or use the remote control to attempt to turn on the TV.

If the TV powers on successfully, it was likely a temporary issue or minor glitch that the power cycle resolved.

Monitor the TV’s performance to ensure it remains stable. In case it’s the other way around, there are still more fixes to try below.

Check the Remote Control

When it comes down to your Insignia TV remote control, there are few things to check before ruling out the possibility that your TV that’s not turning on isn’t affected by a bad or damaged remote control.

While trying to put on the TV using the remote control – Is your Insignia TV unresponsive to the remote control or showing no signs of powering on?

Let’s dive into the troubleshooting steps related to the remote control and fixes that may help you resolve the issue.

Firstly check out the remote batteries. You need to ensure that the batteries in your TV remote control are functioning properly.

Replace the batteries with fresh ones to eliminate the possibility of a weak or depleted power source.

And also, remember to align the batteries correctly according to the polarity markings in the batteries compartment, probably at the back of the remote control.

Read Also: How to Forget a Network on Roku [Easy Guide]

Since interference from obstruction or distance can also make your Insignia TV not to turn on, it’s advisable to ensure you’re aiming the remote control properly (pointed directly to the TV).

Make sure you are pointing the remote control directly at the TV and within a reasonable distance.

Obstructions, such as furniture or other devices, may hinder the signals from reaching the TV.

Try adjusting your position or removing any obstacles that might be blocking the signal path.

If possible, try using a different remote control that is compatible with your Insignia TV.

This step helps determine if the problem lies with the original remote control or the TV itself.

If the TV turns on using a different remote control, you may need to replace or fix the original remote if possible.

Try Out the Manual Power Button on the TV

Why Is Your Insignia TV Not Turning On

In case you notice a power indicator on your Insignia TV as it won’t turn after retrying countless times with the TV remote, you may need to try out the manual power button on the TV made for emergencies like this.

Now to do this, Locate the manual power button on your Insignia TV itself, typically found on the side or bottom panel.

The location may probably be different depending on the model of your Insignia TV. Be aware it is often marked with a power symbol (typically a circle with a vertical line).

Press the power button to check if the TV responds. If it turns on manually but not with the remote control, it indicates a potential issue with the remote control itself.

Factory Reset the Insignia TV

Resetting your Insignia TV can often solve issues preventing it from turning on. There are two types of resets: a soft reset and a factory reset. Since you’ve already tried the soft reset, let’s focus on the factory reset.

A factory reset restores your TV to its original settings, resolving any software-related problems that may be causing the power issue.

Keep in mind that a factory reset erases all personalized settings and configurations, including installed Apps and saved credentials.

To avoid losing important settings, it’s recommended to back them up before proceeding.

Additionally, if you have any external devices connected to your TV, disconnect them and try turning on the TV before attempting to reset the TV.

Supposing the TV mistakenly turns on, you can simply perform a factory reset from the TV settings to prevent such predicament in future times.

In case it’s the other way around in your case, there is no need to fret as I have included a way to factory reset your Insignia TV that won’t turn on.

Here’s how you can perform a factory reset if your TV is on.

  • Press the Home button on the TV remote to revert all action to Home.
  • Navigate to the Settings or Setup section using the arrow buttons on the remote control.
  • Tap on the Device and Software setting.
  • You can click on Advanced System Settings if your version has such an option.
  • Select the Factory Reset option or Reset All Settings. Confirm your action and press OK.
See also  Insignia TV Remote Not Pairing [Try These Fixes]

Now, if you are unable to turn on your Insignia TV and restore its factory settings from the device settings, here’s how you can reset your Insignia TV manually.

You can easily adapt this in a dire situation when you’re unable to get your TV working after a series of trials.

Here is how to go about that;

  • Unplug the TV from the power outlet.
  • Locate the power button on the body of the TV.
  • Press and hold the power button for seconds.
  • While still holding the button, plug back the TV to the power outlet.
  • Then release the button afterwards.
  • You’ll see a recovery screen on your TV.
  • Navigate the screen by clicking the power button.
  • Hover on the wipe data/factory reset option.
  • Then press and hold the power button until you see the wipe data/factory reset option turn green.

How to Factory Reset the Insignia TV

Contact the Manufacturer for Assistance

If you have diligently followed the troubleshooting steps outlined above and your Insignia TV still refuses to turn on, it may be time to seek professional assistance.

While many issues can be resolved through potential troubleshooting, more complex problems may require the expertise of a trained technician.

You can easily get in touch with Insignia’s customer support team to report the issue and seek guidance.

They may provide specific instructions tailored to your TV model or offer further troubleshooting advice.

They can be easily reached through their website, email, or phone. Direct support hotline at 1-877-467-4289.(with operation hours: Daily: 8 a.m. to 9 p.m. CT).

Ensure you provide them with accurate information about your experience. as it assists them in diagnosing the problem more efficiently and will save time while fixing it for you.

Wrapping Up

In conclusion, a non-functioning Insignia TV can be a frustrating experience, but there are several troubleshooting steps you can take to address the issue.

Almost every electronic device possesses both advantageous and disadvantageous aspects.

The problem of TVs breaking down emerges at great pace in recent times which requires a series of troubleshooting steps to get it fixed.

You can check my article on how you can rectify the issue of your TCL TV not turning on.

How to Fix TCL TV Not Turning On

Frequently Asked Questions:

Is there a reset button on an Insignia TV?

Yes, some Insignia TVs have a reset button. The location of the reset button can vary depending on the model of the TV. It is typically located on the back or side panel of the TV.

This manual reset button is used to restore the TV to its factory default settings, which can help resolve certain issues.

If you’re experiencing problems with your Insignia TV and want to perform a reset, consult the TV’s user manual or contact Insignia customer support for specific instructions based on your TV model.

Can a power surge cause an Insignia TV to stop turning on?

Yes, a power surge can potentially cause an Insignia TV to stop turning on. During a power surge, an excessive voltage spike can damage electronic components in the TV, including the power supply or other vital circuitry.

This damage can result in the TV failing to power on or experiencing other malfunctions. To protect your TV from power surges,

It is advisable to use a surge protector or consider investing in an uninterruptible power supply (UPS) that offers surge protection capabilities.

These devices help safeguard your TV and other electronics from voltage fluctuations and unexpected power surges, reducing the risk of damage and ensuring smooth operation.

How do I manually turn on my Insignia TV without a remote?

To manually turn on your Insignia TV without a remote control, you can typically locate the power button on the side or bottom panel of the TV itself.

Look for a button labeled Power or an icon resembling a power symbol.

Press this button to turn on the TV manually. If you are unable to locate the power button,

referring to the TV’s user manual or contacting Insignia customer support for model-specific instructions would be beneficial.

Related Articles:

Leave a Reply

Your email address will not be published. Required fields are marked *