Philips TV Remote Blinking Orange: What it Means and How to Fix It
Did you noticed a blinking orange light on your Philips TV remote? This could be a sign that something is wrong with either your television or the remote itself.
While it may be alarming, there are several reasons why your Philips TV remote may be blinking orange, and most of them are easy to fix.
One of the most common reasons for a blinking orange light on your Philips TV remote is low battery power. If your remote is running out of charge,
it may emit a flashing orange light as a warning. In this case, simply replacing the battery with a new one should fix the issue.
Another reason for a blinking orange light could be a power supply issue with your television. If this is the case, you may need to contact customer support for further assistance.
However, before doing so, it’s important to rule out other possible causes, such as a defective remote or a problem with the TV’s settings.
In this post, I will explore the reasons why your Philips TV remote may be blinking orange light all of a sudden and provide you with some DIY fixes that you can try to resolve the issue in no time.
Reasons Why Your Philips TV Remote is Blinking Orange
If your Philips TV remote is blinking orange light, it can be frustrating and leave you wondering what the problem is. There are several possible reasons why your Philips TV remote may started blinking orange light unexpected, and I’ve outlined them below.
Weak Batteries
The most common reason why your Philips TV remote is blinking orange is weak batteries. If the batteries in your remote are low, it can cause the remote to stop working correctly.
If you suspect that the batteries in your remote are low, try replacing them with new ones. Make sure you insert the batteries correctly and that they are fully charged.
Remote Control Interference
Another possible reason why your Philips TV remote is blinking orange is interference from other devices. If you have other electronic devices near your TV, they can interfere with the signal from your remote.
And also, your distance from the TV. Try moving any electronic devices away from your TV and move a bit closer to the TV to see if that solves the problem.
Remote Control Malfunction
If your Philips TV remote is still blinking orange after replacing the batteries and moving away any electronic devices, it could be a malfunction in the remote itself.
Electronics tends to be bad after using for a long period of time. Especially if you do drop the remote frequently. Check the remote for any visible damage or signs of wear and tear. If the remote is damaged, you may need to replace it.
TV Sensor Issue
The TV sensor receives signals from the remote and translates them into commands. If the sensor is not working correctly, it can cause the remote to blink orange.
If you have checked the possible causes mentioned above and found no defects, there is a chance that the issue is with your Philips TV.
In most cases, simply restarting the TV can fix this issue. However, sometimes restoring the TV to its default settings may be necessary before it starts working properly again.
How to Fix Philips TV Remote Blinking Orange
Replace the Remote Batteries
The first thing to check when your Philips TV remote is blinking orange is the batteries. If the batteries are low, the remote may not work properly.
In such instances, replacing the existing batteries with new pairs can help you determine in no time that issue doesn’t lies with the remote power source.
If you have a new pair or another working remote with the same battery size, any of the two can help out. To replace the batteries, follow these steps:
- Open the battery compartment on the back of the remote.
- Remove the old batteries and dispose of them properly.
- Take a closer look at the battery compartment for corrosion or dirt that can be preventing the battery connection.
- Insert new batteries into the remote, making sure to match the + and – symbols.
- Close the battery compartment.
- Now point that remote directly to the TV and try pressing the buttons to see if it’ll work.
Check for Signal Interference
If replacing the batteries doesn’t work, the next step is to check for interference that may likely be disrupting the remote signal.
This can be caused by the distance, other electronic devices in the room, such as a wireless router or a cordless phone. Since the remote uses infrared technology/waves to communicate with the TV, which has a short range and is susceptible to interference.
Checking for any sort of obstruction is quite important. To check for interference, try the following:
- Move any electronic devices away from the TV and remote.
- Turn off any electronic devices that are not in use.
- Try using the remote again.
- And also, move a bit closer to the TV and ensure you’re pointing the remote directly to the TV.
- Now check if it connect successfully.
Reset the Philips TV Remote Control
If the batteries and interference are not the issue, you can try resetting the remote control. To reset your Philips TV remote control, follow these steps:
- Remove the batteries: Open the battery compartment on the back of the remote control and take out the batteries. Make sure to remove both the old and new batteries if you recently replaced them.
- Press and hold the power button: While the batteries are removed, press and hold the power button on the remote control for about 5 seconds. This will discharge any residual power and reset the remote.
- Reinsert the batteries: After releasing the power button, reinsert the batteries into the remote control. Make sure they are properly aligned with the correct polarity (+/-) as indicated inside the battery compartment.
- Test the remote control: Point the remote control towards the TV and press some buttons to see if it is functioning properly. Check if the LED indicator on the remote control stops blinking orange and returns to its normal state.
- Pair the remote control (if necessary): In some cases, you may need to pair the remote control with your Philips TV by pressing the physical pairing button.
Power Cycle Your Philips TV
In case all else fails for fixing the orange blinking light on your Philips TV remote, you might need to power cycle the Philips TV to restart all it functions if that will fix the remote connection error.
Since the TV itself can be causing the disruption, restarting it is quite essentially as that resolve various issues with electronic devices. Here’s a detailed guide on how to power cycle your Philips TV:
- Turn off the TV: Locate the power button on your Philips TV or use the remote control to turn it off. Ensure that the TV is completely powered down.
- Unplug the TV: Locate the power cord at the back of the TV and unplug it from the electrical outlet. Make sure to disconnect it from both the TV and the wall socket.
- Disconnect other connected devices: If you have any external devices connected to your TV, such as gaming consoles, DVD players, or streaming devices, unplug them as well. This step ensures that all components are properly reset during the power cycle.
- Wait for a few minutes: Leave the TV and all connected devices unplugged for at least 5 minutes. This waiting period allows the internal components to discharge and reset completely.
- Plug the TV back in: After the waiting period, plug the TV’s power cord back into the wall socket. Ensure that the power cord is securely inserted at both ends.
- Turn on the TV: Use the power button on the TV or the remote control to turn the TV back on. Wait for a few moments and see if the remote control’s orange blinking light issue has been resolved.
If the TV turns on properly without any issues, you can now reconnect the external devices one by one. Plug them back into the appropriate ports and ensure they are powered on.
Now test out the remote control, check if the orange blinking light on the remote control has stopped.
Try using the remote control to navigate the TV’s menus or adjust the volume. If the remote control functions normally, the power cycle likely resolved the issue.
Performing a power cycle helps to clear temporary glitches and reset the TV and its components. It is a simple yet effective troubleshooting step that often resolves minor issues with electronic devices, including remote control problems.
Try Out the Philips Mobile App
If you find that your Philips TV remote is unresponsive and the orange light keeps blinking, even after attempting all the fixes suggested in this post, there is an alternative solution that you can use in the meantime.
You can download and use the Philips TV remote app. This app allows you to control your TV from your smartphone or tablet, providing you with an alternative means of accessing your TV’s features and functions.
Simply download the app onto your device and connect it to your TV to start using it as a remote control. While it may not be a permanent solution, it can be a useful workaround until you are able to resolve the issue with your physical remote.
Here’s a detailed guide on how to do that:
- On your smartphone or tablet, go to the app store (Google Play Store for Android devices or the App Store for iOS devices) and search for the “Philips TV Remote” app. Download and install the app on your mobile device.
- Make sure both your TV and mobile device are connected to the same Wi-Fi network. Launch the Philips TV Remote app on your mobile device.
- On the app’s home screen, tap the “Add TV” or similar option. The app will scan for available Philips TVs on the same Wi-Fi network. Select your TV from the list of detected devices.
- Follow on-screen instructions: The app will provide on-screen instructions to complete the setup process. Follow the prompts to establish a connection between your TV and mobile device.
- Once the connection is established, you should be able to control your Philips TV using the mobile app. The app provides a virtual remote control interface with buttons for power, volume, channel selection, and other functions.
Final Thought
In conclusion, if your Philips TV remote is blinking orange, it could be due to a number of reasons, such as dead batteries, interference from other electronic devices, or a malfunctioning remote.
To fix the issue, you can try replacing the old batteries with new ones, removing any sources of interference, or resetting the remote. If none of these solutions work, you may need to contact Philips customer support for further assistance.
It is important to note that troubleshooting your Philips TV remote blinking orange issue can save you time and money compared to buying a new remote or hiring a technician to fix the problem.
If you are experiencing issues with your Roku remote volume not working, check out my guide on how to fix Roku remote volume not working.
Frequently Asked Questions
Do all Philips remotes work with all Philips TVs?
No, not all Philips remotes work with all Philips TVs. Compatibility between remotes and TVs can vary based on the specific models and technologies used. It is important to check the compatibility of the remote control with your Philips TV model before assuming it will work.
Can I use my phone as a Philips remote?
Yes, you can use your phone as a Philips remote by downloading the Philips TV Remote App. This app allows you to control your TV using your smartphone as a remote. However, both your phone and TV need to be connected to the same Wi-Fi network for the app to work.
Can I use my Philips TV without a remote?
Yes, you can use your Philips TV without a remote. Many Philips TVs have built-in control buttons on the device itself, typically located on the side or bottom of the screen.
These buttons allow you to navigate through the TV’s menu, adjust volume, change channels, and perform basic functions without the need for a remote control.
Simply locate the control buttons on your Philips TV and use them to operate the TV even if you don’t have a remote handy.
How do I reconnect my Philips TV remote?
Reconnecting your Philips TV remote with the TV is simple and straightforward process. To reconnect your Philips TV remote, follow these steps:
- Ensure that your TV is turned on and in a ready state.
- On the back of the remote, remove the battery cover.
- Take out the batteries and wait for about 10 seconds.
- Reinsert the batteries back into the remote, making sure they are properly aligned.
- Stand close to the TV and point the remote towards the TV’s infrared sensor.
- Press and hold the “OK” button and the “0” button simultaneously for about 5 seconds.
- Release the buttons when you see the green light on the remote blinking.
- Wait for a few seconds while the remote reconnects to the TV. The green light should stop blinking and remain steady.
- Test the remote by pressing various buttons to ensure it is working correctly.
How do you reset a Philips remote control?
To reset a Philips remote control, remove the batteries and press all the buttons on the remote simultaneously for a few seconds. Then, insert the batteries again and try using the remote. Here’s a step-by-step procedure to do that:
- Remove the batteries: Open the battery compartment on the back of the remote control and take out the batteries.
- Press and hold the power button: While the batteries are removed, press and hold the power button on the remote control for about 5 seconds. This helps discharge any remaining power in the remote.
- Reinsert the batteries: Put the batteries back into the remote control, ensuring they are correctly inserted with the correct polarity (+/-).
- Test the remote control: Aim the remote control towards your Philips TV and press various buttons to check if it is functioning properly. If it works as expected, the reset process is complete.
Related Articles
