How to Connect Spectrum Remote to Onn TV
Spectrum remotes are known for their versatility, as they can be programmed to work with a variety of TV brands, including ONN. All you need is your Spectrum remote, your ONN TV, and a few minutes to spare.
If you have a Spectrum remote and an ONN TV, but you’re not quite sure how to connect the two.
Luckily, programming your Spectrum remote to work with your ONN TV is a quick and easy process that can save you from having to juggle multiple remotes.
Whether you’re setting up your remote for the first time or you’re having trouble getting it to work with your ONN TV, I’ve got you covered.
Firstly, you need to identify the model of your Spectrum remote. Once you’ve done that, you can follow the step-by-step instructions to program your remote to work with your ONN TV.
What is the Spectrum Code for Onn TV?
Before you can connect your Onn TV to your Spectrum remote, you will need to know the correct code to program it.
The Spectrum remote code is a unique series of numbers that acts as a language bridge between your remote and TV.
By inputting this code, you establish a direct connection, allowing your remote to understand and execute your commands on your Onn TV.
Here are some of the most common Spectrum codes for Onn TVs:
- 705
- 387
- 031
- 268
- 749
These are the 3-digit codes that you can try first. If none of these codes work, you can also try the 4-digit and the 5-digit codes;
- 2434
- 1756
- 2397
- 0885
- 0463
- 2049
- 0047
- 0706
- 3078
- 2360
- 1098
- 1228
- 2511
The 5-digit codes
- 11756
- 14398
- 12397
- 12434
- 10885
- 11447
- 12049
- 10463
- 12360
How to Connect Spectrum Remote to Onn TV
Connecting your Spectrum remote to your ONN TV is a straightforward and hassle-free process. Depending on the type of Spectrum remote you own, follow the specific steps outlined below.
Simply scroll to the section that corresponds to your remote type and follow the instructions accordingly.
Programming Spectrum Guide Remote to Onn TV
- Grab that Spectrum remote and turn on your Onn TV
- Press and hold the Menu and the OK button on your Spectrum remote until the Input light on the remote blink twice.
- Now input your TV code with remote number buttons. The Input button light will blink twice to confirm that the code was entered correctly.
- Press the power button on your remote. The TV should turn off. If it does not turn off, repeat steps trying different code.
- Keep trying each code till you find the one that turns off your TV.
It’s important to note that not all Onn TVs will respond to the same code. If the code doesn’t work in your case, try using the code search function on your remote. Here are the steps to follow:
- Turn on your Onn TV
- Press and hold the Menu + OK button on your Spectrum remote until the LED light on the remote turns on.
- Enter the code “991” using the number buttons on your remote.
- Press the power button on your remote and then press the Channel Up button repeatedly until the TV turns off.
- Press the power button again to turn on the TV and lock in the code. The LED light will turn off.
That’s it, you have successfully programmed your Spectrum Guide Remote to work with your Onn TV!
Programming Universal CLIKR-5 Remote to Onn TV
Programming your Universal CLIKR-5 remote to your Onn TV is a simple process that can be completed in just a few steps. Follow the instructions below to get it done in no time.
- Turn on your Onn TV and hold down the TV and OK button on your CLIKR-5 remote until the LED light turns on.
- Enter the code for your Onn TV using the number buttons on your remote.
- Once you have entered the code, press the power button on your remote to test if the TV turns off.
- If it does, press the TV button again to save the code.
- If the TV does not turn off, repeat steps 2 and 3 with a different code until you find the correct one.
However, you can also use the manual scan in this case as well. After turning on your TV, put the remote into pairing mode by pressing the TV and OK button simultaneously for three seconds.
Now point the remote directly to your Onn TV and keep pressing the Channel up or Channel down button.
The remote will automatically try random codes until it finds the perfect match for your Onn TV.
Once your TV turns off on its own, simply press the power button on the Spectrum remote to turn it back on, and the programming code will be locked in automatically.
After you have successfully programmed your remote, test out the other buttons to ensure they are working properly.
If any buttons are not working, you can simply repeat the programming process.
Programming Philips RC122 Remote to Onn TV
If you happen to own the Philips RC122 remote type, follow these steps to seamlessly program it with your Onn TV.
- Turn on your Onn TV and your Philips RC122 remote by inserting the batteries.
- Press and hold the TV and OK button on your remote until the button light blinks twice.
- Enter the code 991 using the number keys on your remote. The light should blink twice again.
- Now press the PLAY arrow button one time.
- If your TV powers off, press the power button to turn it back on and press OK to lock in the code.
- In case your TV doesn’t turn off on pressing the PLAY button, press the REWIND or FF arrow buttons to step through the available codes until it does.
- Press OK as soon as the TV powers off.
- Then verify by pressing the Power button.
Wrapping Up
In a nutshell, connecting your Spectrum remote to your ONN TV is a simple process that can be completed in just a few minutes.
By following the steps outlined in this article and using the correct code for your Onn TV, you can easily program your remote in no time.
In case you encounter any issues, you can always reach out to Spectrum support for professional assistance.
Frequently Asked Questions
Can Spectrum remote control Onn TV?
Yes, you can use a Spectrum remote to control your Onn TV. However, you will need to program the remote to work with your TV. You can follow the steps provided earlier in this post to program your remote to your Onn TV.
Can Onn TV use a universal remote?
Yes, Onn TV can use a universal remote. However, you need to ensure that the remote is compatible with your TV. You can check the user manual of your Onn TV to see the list of compatible universal remotes.
Can I control my Onn TV without a remote?
Yes, you can control your Onn TV without a remote. You can use the buttons on the TV itself to change channels, adjust the volume, and turn the TV on or off. If your Onn TV has a mobile app, you can also use your smartphone as a remote control.
Where is the reset button on Onn TV?
The reset button on an Onn TV is usually located at the back of the TV. You can use a paper clip or a similar object to press the button.
However, before you reset your TV, make sure to back up your data and settings as the reset will erase all your settings and data.
Related Articles
