How to Fix Firestick Remote Not Pairing With TV

Having trouble pairing your Firestick remote with your TV? It can be frustrating when you’ve settle down to watch your favorite show or movie and the remote just won’t work.

But don’t worry, there are several easy steps you can take to fix this issue.

First, make sure the batteries in your remote are fresh and properly installed. If the batteries are low, the remote may not be able to connect to your TV.

You should also try moving closer to your TV, as the remote may not work if you’re too far away.

If that doesn’t work, try unpairing and then pairing your remote again. This can be done using a simple workaround with the Firestick remote.

In this guide, I’ll go over some common reasons why your Firestick remote might not be pairing with your TV and provide step-by-step instructions on how to fix the issue. So keep on reading for more detailed instructions.

How to Fix Firestick Remote Not Pairing With TV

How to Fix Firestick Remote Not Pairing With TV

Move Closer to Your TV

If your Firestick remote is not pairing with your TV, one of the first things you should try is moving closer to your TV. Sometimes, the remote signal can get blocked or weakened due to distance or obstacles, causing the pairing to fail.

To move closer to your TV, simply sit or stand closer to it, preferably within 10 feet. This will ensure that the remote signal reaches your TV without any interference.

If you’re still having trouble pairing your remote, try pointing it directly at your TV. Sometimes, pointing the remote at an angle or away from the TV can cause pairing issues.

It’s also worth noting that some TV models may require you to be closer to the TV for the remote to pair successfully.

In addition, if you have any objects that may be blocking the remote signal, such as furniture or other electronics, try moving them out of the way.

This can help ensure that the remote signal reaches your TV without any interference. More details on this in the next section.

Remove Interference and Obstruction

Here are some things you can do to remove any potential interference:

  • Move any electronic devices that may be causing interference away from your TV and Firestick. This includes cell phones, tablets, laptops, and other wireless devices.
  • Check for any physical obstructions between the remote and the Firestick.
  • Make sure there are no objects blocking the line of sight between the remote and the Firestick. This could include furniture, walls, or other objects.
  • Try using the remote from a different location in the room. Sometimes, the signal can be blocked by the location of the remote or the Firestick.

Check the Firestick Remote Batteries

Another thing you should check is the Firestick remote batteries. Dead batteries are one of the most common reasons why the remote stops working and refuse to pair.

You should replace the old batteries with new ones and see if that solves the problem.

Make sure that you insert the batteries correctly. The positive and negative ends of the batteries should match the markings inside the battery compartment. If the batteries are not inserted correctly, the remote will not work.

If the batteries are new and the remote still does not work, check if the battery connector is damaged. Sometimes, the battery connector may get bent or damaged, causing the batteries to lose contact with the remote.

If you notice any damage, you can try to fix it by gently bending the connector back into place.

Another thing to check is whether the batteries are connecting properly. Sometimes, the battery contacts may become dirty or corroded, preventing the batteries from making a proper connection with the remote.

If this is the case, you can clean the battery contacts using a cotton swab dipped in rubbing alcohol.

Check and Remove Other Controllers

The Firestick can only pair with a number of controllers at once. If you have reached this limit, you will need to remove one of the paired controllers before you can pair a new one.

How to Fix Firestick Remote Not Pairing With TV

To check how many controllers are currently paired to your Firestick, go to the “Settings” menu, then select “Controllers & Bluetooth Devices.” From there, you can see how many controllers are currently paired with your device.

How to Fix Firestick Remote Not Pairing With TV

If you happen to have another controller connected to your Firestick, you may need to remove it before attempting to pair another.

To remove a paired controller, simply select it from the list of paired devices and choose “Remove.” This will unpair the controller from your Firestick, allowing you to pair a new one.

In the meantime, if you need to navigate your Firestick without a remote, you can use the Amazon Fire TV app on your smartphone or tablet.

The app allows you to control your Firestick using your mobile device, so you can still access all your favorite shows and movies while you work on fixing the remote pairing issue.

Power Cycle the Firestick and Your TV

Try to turn off your devices and turn it back on after a while. Power cycling can help reset any connectivity issues that may be causing the pairing problem with the Firestick remote.

To power cycle your Firestick, simply unplug it from its power source and wait for about 30 seconds. Next, you should power cycle your TV.

To do this, unplug it from the power source and wait for about 30 seconds. Then, plug it back in and turn it on again.

Once both devices have been power cycled, try pairing your remote with your TV again.

How to Fix Firestick Remote Not Pairing After Factory Reset

Don’t worry if your Firestick remote is not pairing after a factory reset. This is a common issue, and you can resolve it with a few simple steps.

Below are some troubleshooting tips to help you get your remote paired and working properly again:

One of the most common reasons for Firestick remote not pairing before or after a factory reset is a dead or dying battery. Make sure to insert a fresh pair of batteries into the remote and try pairing it again.

Another reason for the remote not pairing could be that it’s out of range. Make sure that you are within range of the Firestick device when trying to pair the remote. If you’re too far away, the remote won’t be able to connect.

Sometimes, restarting the Firestick device can help solve the problem. Unplug the device and wait for a few minutes before plugging it back in. Once the device has restarted, try pairing the remote again.

If none of the above steps work, you can try resetting the remote. Press and hold the Home button for 10 seconds.

When the LED indicator blinks blue, your remote is paired successfully. If it’s not paired, press the Home button for 10 seconds again.

If the remote still doesn’t pair, you can try pairing it manually. You can control your TV with the Fire TV App.

Go to Settings >> Controllers and Bluetooth Devices >> Amazon Fire TV Remotes > Add New Remote. Follow the on-screen instructions to pair the remote manually.

How to Fix Firestick Remote Not Pairing With New Batteries

If your Firestick remote is not pairing with your TV even after replacing the batteries, there are a few things you can try to fix the issue.

First, make sure you have inserted the batteries correctly. Check the polarity of the batteries and ensure they are inserted in the right direction. If the batteries are inserted incorrectly, the remote won’t work.

If you have inserted the batteries correctly, try resetting the remote.

Wrapping Up

I hope this guide has helped you resolve the issue of your Firestick remote not pairing with your TV. Remember to follow the troubleshooting steps in the order listed, and be patient as you work through them.

If you’re still having trouble after trying all of the steps, it may be time to contact Amazon customer support for further assistance. They may be able to help you identify a hardware issue with your remote or Firestick device.

In the future, remember to keep your Firestick remote updated with the latest software updates, and always replace the batteries when they start to run low.

This will help prevent future pairing issues and keep your Firestick running smoothly.

Thank you for reading, and I hope this guide has been helpful to you!

Frequently Asked Questions

Can I control my Firestick from my phone?

Yes, you can control your Firestick from your phone. You can download the Amazon Fire TV app on your phone and use it as a remote.

The app is free and available for both Android and iOS devices. With the app, you can navigate the Firestick menu, play and pause videos, and use voice commands.

How do I resync my Firestick remote to my TV?

To resync your Firestick remote to your TV, follow these steps:

  • Hold down the Home button on the remote for at least 10 seconds.
  • Wait until the LED light on the remote starts flashing.
  • Unplug the Firestick from the power source and wait for 30 seconds.
  • Plug the Firestick back in and wait for it to start up.
  • Wait for the remote to pair with the Firestick. This may take a few seconds.

Related Articles

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *